10 Non-Orthotic Uses for Orficast

Different and inventive ways of using Orficast Thermoplastic on a Roll

It is well-known that Orficast and Orficast More are great for making all types of orthoses for fingers, thumbs and hands. But did you know that you can also use Orficast for non-orthotic use in many creative ways? Here are just a few ideas to get you started.

 

1. Help strapping materials stick

Orficast is a very sticky material when heated directly with the heat gun. It is an excellent interface between the completed orthosis and hook-and-loop strapping materials. To firmly attach loop straps, place heated Orficast around the loop strap and adhere it directly to the orthosis. Heat Orficast and also the adhesive-backed hook tape to bond together more securely.

Orficast orthosis with hook and loop strapping

Orficast forms an excellent interface between strapping materials and the finished orthosis.

 

2. Make straps easier to grip

You can use Orficast to increase the size of the loop strapping to make it easier for someone with limited pinch to grasp, like in a patient with arthritis or weakness of the thumb muscles. Cut a narrow piece of Orficast and apply it over the sides of the loop strap.

Orficast orthosis with reinforced loop strap.

Use Orficast to make loop straps bigger and easier to grasp.

 

3. As a hinge

Roll Orficast into hinges and use them to link two parts of an orthosis together at the joint axis level. Flatten the edges of the rolled Orficast to make it easier to adhere to the orthosis. Use pliers to create the bending spot if necessary. Heat both the ends of the Orficast tube and the orthosis with the heat gun and secure the hinge into place.

The orthosis will allow motion at the joint and you can easily add components for dynamic and/or static progressive orthoses to increase passive range. The Orficast hinge protects the joint from compression and distraction forces.

Static progressive orthosis with an Orficast hinge.

Roll Orficast into a narrow tube and use it as a hinge.

 

4. To block undesired motion

Rolled Orficast can also be placed to block undesired motion as in a Dart Thrower’s Motion Orthosis.

When placed correctly, it blocks pure wrist flexion and extension but allows movement in the Dart Thrower’s place of radial deviation and extension towards ulnar deviation and flexion. In this way, it allows the scapho-lunate ligament to heal without excessive strain.

Dart thrower's motion orthosis in Orfit Colors NS Ocean Blue

In a Dart Thrower’s Motion Orthosis, a rolled piece of Orficast can be placed to block undesired motion.

 

5. Finger Caps

Orficast can be made into finger caps for protection, over sensitive fingertips or over amputated fingertips. Make the dorsal or volar side slightly longer to help with strapping or use Coban wrap tape to keep the cap in place.

 

6. Finger cuffs for mobilization orthoses

When fabricating a mobilization orthosis, use Orficast to create comfortable finger cuffs for each individual finger.

Cut narrow strips of Orficast, heat them in the water bath and fit them around the patient’s finger. When hardened, place the elastic around the cuff and cover with another piece of heated Orficast to ensure it stays in place. Or simply fold the Orficast around the elastic and then mould around the finger with the string already in place.

Orficast as finger cuffs for mobilization orthoses.

 

7. Finger separators

Create finger separators in a resting orthosis with rolled pieces of Orficast.

Add the Orficast to the orthosis and position the patient’s hand while the material is still soft. This way, the patient can find the most comfortable finger positioning. When hardened, the Orficast tubes will help to maintain this positioning.

A resting hand orthosis with Orficast separators.

A resting orthosis with Orficast separators.

 

8. Easy-to-grip handles

Wrap Orficast around pens and markers to make them easier to grab and hold on to.

A custom Orficast handle for a pen.

 

9. On zippers

Zipper tabs can be hard to grab for patients with a weakened grip. Using Orficast to increase the size of a zipper tab on a backpack or suitcase can make an enormous difference. You can make it as large as needed; simply heat a piece of Orficast, wrap it around the zip tab and let it harden.

 

10. Enforce knots

When using elastic thread for a mobilization orthosis, it is very important that the knots do not loosen as this could affect the traction. Enforce the tied knots with a piece of Orficast so they do not come apart.

 

We are eager to hear your ideas for non-orthotic uses of Orficast and Orficast More! Share them with us in the Orfit Splinting and Rehabilitation Group on Facebook.

 

Written by Debby Schwartz, OTD, OTR/L, CHT

Physical Rehabilitation Product and Educational Specialist at Orfit Industries America.

Debby is a hand therapist with over 34 years of clinical experience. She completed her Doctorate of Occupational Therapy at Rocky Mountain University of Health Professions in 2010.

She is also an adjunct professor at the Occupational Therapy Department of Touro College in NYC and has written many articles for hand therapy journals, including the ASHT Times and the Journal of Hand Therapy.

 

If you’d like to receive the latest product updates and interesting Orfit news, subscribe to our newsletter:

Subscribe to our mailing list

* indicates required
Select your preferred newsletters

The protection of your personal data is our priority. Thank you for subscribing to one of our newsletters. We would like to invite you to share some personal data with us. The protection of this data is our priority.

By submitting this form, I agree to the processing of my data to receive personal messages by mail.

You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at welcome@orfit.com. We will treat your information with respect. For more information about our privacy practices please visit our website. By clicking below, you agree that we may process your information in accordance with these terms.

We use MailChimp as our marketing automation platform. By clicking below to submit this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their Privacy Policy and Terms.

We've selected some similar articles for you

10 Tips for a More Comfortable Orthosis

Make a supportive and comfortable orthosis that helps your patient stick to the wearing schedule

When your patient feels that their custom-made orthosis is not comfortable, they simply will not wear it despite its necessity for optimum recovery. Use these ten tips to make an orthosis that is supportive and comfortable so that your patient will stick to the wearing schedule as outlined and optimise their recovery.
Read more

Orthotic Fabrication for MCP Joint Instability

Thumb metacarpal-phalangeal joint hyperextension

There are many ways to provide stability to the MCP joint with an orthosis. Any orthosis that prevents hyperextension but allows active flexion will benefit the patient. Keep it simple and easy to don and doff without excessive bulk. Learn more about MCP Joint instability and how to treat it with an orthosis.
Read more

A Static Progressive Finger Flexion Cuff from Orficast

Increase passive PIP and DIP range of motion

A quick and easy finger flexion cuff to increase passive PIP and DIP range of motion can easily be made from Orficast 3 cm (1"). The orthosis provides low load tension to promote increased PIP and DIP joint range of motion.
Read more