Shoulder Positioning in Radiation Therapy

Improve patient comfort and facilitate shoulder positioning

This blog post gives an overview of tips and tools you can use to facilitate shoulder positioning for head and neck patients to improve patient comfort and decrease interfractional shoulder displacements.

We’ll be covering the following topics:

> Shoulder Positioning Challenges
> Shoulder Positioning Tips
> Shoulder Positioning Tools

 

Immobilization set-up with Orfit head, neck and shoulders mask to help improve shoulder positioning.

Immobilization set-up with Orfit head, neck and shoulders mask to facilitate shoulder positioning.

 

.

Shoulder Positioning Challenges

Shoulder positioning comes with a certain set of challenges, being:

  • Anatomical characteristics
  • Weight loss
  • Stress.

It is important to stay aware of them, so you can take them into account each time you are positioning head and neck patients.

 

Anatomical characteristics

The shoulder is one of the most mobile joints in the human body. It can move freely in different directions, and that is why it can be so challenging to immobilize.

 

Weight loss

Head and neck patients tend to lose weight throughout treatment. As a consequence, the thermoplastic mask may not conform as well as it did at the start of the treatment. Especially around the shoulders and chest. This could cause the shoulder position to differ from the one determined in the treatment plan.

 

Stress

At the start of treatment, patients tend to be very tense because they are positioned for the first time and everything is very new to them. The mask moulding process can be distressing and the hospital environment may feel unfamiliar. As a result, many patients pull their shoulders up.

This has two consequences:

  • Firstly, the shoulders could cover the treatment area in the neck.
  • Secondly, the shoulders may come down over the course of treatment. This often happens as the patient starts to feel more at ease. This could cause interfractional variations in shoulder positioning and affect the mask’s conformity.

.

Moulding a 5-points head, neck and shoulders mask maintaining correct shoulder positioning.

Be aware that tense patients may pull their shoulders up during simulation.

 

.

Shoulder Positioning Tips

Fortunately, you can use several effective tools and techniques to work around these challenges to optimize shoulder positioning and improve your patient’s comfort.

Foremost, we want to stress the role of the radiation therapist. At the start of each fraction, perform visual checks to verify the shoulder position. In addition, the following tips could help you as well:

 

Manual shoulder positioning

Before you start moulding your patient’s mask, pull the shoulders down as much as possible. Then, mould the mask as you normally would and let it set completely.

> Learn how to optimally mould an Orfit 5-points mask.

During the radiation therapy treatment, always make sure that the shoulders sit closely against the thermoplastic mask.

 

Imaging

Take full advantage of MV, kV or CBCT imaging before each fraction. On these images, you can effectively compare the shoulder position with the CT planning images. Have there been any shoulder shifts? Then you can reposition the shoulders.

 

Positioning guides

Draw positioning guides on the mask and the patient’s skin. These guides form an excellent reminder to pay extra attention to the shoulder positioning.

Draw a horizontal line at the exact point where the mask stops at the upper arm. Optionally, draw a vertical line that starts on the mask and extends onto the skin.
.

5-points mask with shoulder positioning guides

Positioning guides are an excellent tool to find the correct shoulder position.

.
Before each fraction, use the guides on the mask and arms to find the correct shoulder positioning. The horizontal line on the patient’s skin should align with the edge of the mask. The vertical line should correspond with the line on the arm.

If you consistently verify this alignment, you can make sure that the shoulders are well-positioned inside the mask.

 

.

Shoulder Positioning Tools

Several tools exist that can help to maintain the shoulders in the right position over the course of the treatment. None of these will completely prevent shoulder motion, but they do make the treatment more comfortable for your patient. In turn, this will make it easier for them to remain in the correct position.

Again, the RTT should take extra care to check the shoulder positioning even if these tools are used.

 

5-points thermoplastic mask

The first tool that comes to mind is, of course, a 5-points head, neck and shoulders mask.

A well-moulded 5-points mask that fits nicely around the shoulders will be very helpful when it comes to maintaining the correct shoulder position. As mentioned earlier, it is best to push the shoulders down before you start moulding.

> Find the right Orfit Thermoplastic Mask for your patient.

 

Vacuum bag or Moldcare

A T-shaped Vacuum Bag or Moldcare Cushion gives extra support to your patient’s shoulders. These tools position the head, as well as making individual shoulder positioning possible.

The vacuum bag or cushion offers added comfort and prevents the shoulders from sagging during treatment.

 

Shoulder retractor

The shoulder retractor can help to pull the shoulders down when moulding a 5-points mask.

Certain studies (e.g. Casey, 2015), however, do point out that the use of a shoulder retractor could make some patients feel tenser.

When using this tool, take extra care to see what works for your patient and for you as a therapist.

 

Hand holds

Special hand holds can be attached to the couch top or base plate. The patient can use these to rest their hands by gripping on to them. This can help them feel more relaxed during treatment which on its turn has a positive effect on tense shoulders.

Hand holds for comfortable immobilization.

Hand holds offer the patients a place to rest their hands during treatment.

 

In conclusion

Take these tips into account when immobilizing your head and necks patients and feel free to share them with your colleagues or department. You will improve patient comfort and will be more likely to maintain a correct shoulder position throughout the radiation therapy treatment of your patients.

 

Further reading on shoulder positioning

> Casey, K. E., Wong, P.-F., & Tung, S. S. (2015). Effect of interfractional shoulder motion on low neck nodal targets for patients treated using volumetric-modulated arc therapy (VMAT). Journal of Applied Clinical Medical Physics16(4), 40–51. https://doi.org/10.1120/jacmp.v16i4.5206

> Mesch, L., Hol, S., D’Olieslager, G., Buijs, C., & Washington, D. (2017). PO-0997: Improving shoulder positioning in a 5-points mask. Radiotherapy and Oncology123, S549–S550. https://doi.org/10.1016/s0167-8140(17)31433-0

> Neubauer, E., Dong, L., Followill, D. S., Garden, A. S., Court, L. E., White, R. A., & Kry, S. F. (2012). Assessment of shoulder position variation and its impact on IMRT and VMAT doses for head and neck cancer. Radiation Oncology7(1), 19. https://doi.org/10.1186/1748-717x-7-19

 

 

Contact us for more product information or find your local distributor here.

 

If you’d like to receive the latest product updates and interesting Orfit news, subscribe to our newsletter:

Subscribe to our mailing list

* indicates required
Select your preferred newsletters

The protection of your personal data is our priority. Thank you for subscribing to one of our newsletters. We would like to invite you to share some personal data with us. The protection of this data is our priority.

By submitting this form, I agree to the processing of my data to receive personal messages by mail.

You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at welcome@orfit.com. We will treat your information with respect. For more information about our privacy practices please visit our website. By clicking below, you agree that we may process your information in accordance with these terms.

We use MailChimp as our marketing automation platform. By clicking below to submit this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their Privacy Policy and Terms.

We've selected some similar articles for you
How to Clean and Disinfect Orfit Masks and Hardware
Hygienic measures to protect the health of patients and staff
Excellent hygiene is now more important than ever. We inform you on how to clean and disinfect the Orfit masks and hardware at your radiotherapy facility.
Read more
How to use Orfit Vacuum Bags
Positioning and indexing vacuum bags for optimal immobilization
It is of vital importance that vacuum bags are positioned and indexed correctly to ensure optimal reproducibility. This article discusses several positioning do's and don'ts and covers all indexing options to get perfect use out of Orfit Vacuum Bags.
Read more
Thermoplastic Bolus for Targeted Radiation Therapy
The characteristics and use of thermoplastic bolus material
What is thermoplastic bolus and how is it applied in radiation therapy? Discover how you can use it to alter the depth of the maximum radiation dose.
Read more